I don’t know if you have been exposed to the Pomodoro Technique, which is a simple time management method. Generally, the Pomodoro time is set to 25 minutes. During the period, only focus on work, do not do things unrelated to work, and take a 5-minute break after the time is up. Then repeat the process. After 4 cycles you can rest a little longer. It is quite simple to implement, the only troublesome thing is to set the alarm clock. If you use your phone to set Pomodoro, you have to set a lot of alarms. For this reason, the Pomodoro Technique is often performed using the Pomodoro, an alarm clock that loops between 25 and 5 minutes.Recently, in order to use the Pomodoro Technique, the maker prusteen passed3D printingway to make a tomato alarm clock.
The first is to design the circuit part. The function of the Pomodoro alarm clock is very simple, so the circuit structure is relatively simple. After confirming the circuit diagram and electronic components, it is time to design the casing of the alarm clock. Since it is the Pomodoro Technique, use the shape of the tomato. Prusteen first sketched and then created the tomato alarm clock shell in modeling software from the sketches.Next is3D printing, the current3D printingIt is already very easy to print an alarm clock casing. Finally, assemble the electronic components and housing, and write the control code, and a Pomodoro alarm clock is completed.
For ease of use, prusteen has set up a one-click on and off function. To use the Pomodoro Technique, you need to press the switch to turn it on, and the Pomodoro alarm clock will automatically cycle. When you’re done working, just press the switch again to turn it off.
(responsible editor: admin)
0 Comments for “3D-printed Pomodoro alarm clock lets you easily perform the Pomodoro Technique”