Oklahoma State University was established in 1890 and is a comprehensive research university in the United States. The school attaches great importance to scientific research and development.In the Oklahoma State University College of Engineering, Architecture, and Technology (CEAT), engineering students can study at the Endeavour Equipment Research Center3D printingAdvanced technology learning.
3D printingApplication analysis” alt=”Oklahoma State University, USA3D printingApplication analysis” />
Endeavour is a 72,000-foot undergraduate equipment research center, which consists of 12 laboratories, 5 manufacturing plants, and 5 design rooms, as well as offices and other non-laboratories. A total of 1500-2000 engineering students take classes here and 38 courses are offered every year. The college is equipped with two Onyx Pro, two Mark Two, one X7 and Metal X3D printingMachine, advanced for learning3D printingTechnology provides conditions.
Dr. Brad Rowland, Procurement Manager of the Endeavour Equipment Center at Oklahoma State University, said:3D printingEquipment, Onyx continuous fiber reinforced by MarkForged3D printingThe technical success attracted our attention. After many evaluations, we finally chose MarkForged3D printingmachine. “
3D printingApplication analysis” alt=”Oklahoma State University, USA3D printingApplication analysis” />
Metal X is Markforged metal3D printingThe machine, using ADAM technology, is easy to operate, and the molding technology based on fused deposition extrusion is safer and more reliable than powder sintering.Dr. Brad Rowland wants Metal X 3D printingThe function helps the students of this college to obtain different3D printingTechnology. “For students, it is a great honor to have the opportunity to learn Metal X’s printing technology.”
Students already use Markforged 3D printingThe aircraft conducts various project experiments, from remote control trolleys to special unmanned aerial vehicles.Dr. Brad Rowland said, “At present, we have two students designing products that are considering applying for patents. One of the products will be made using MarkTwo.”The Endeavor equipment room provides students with conditions from concept to actual operation, allowing students to often produce parts that cannot be manufactured by traditional techniques, or parts that are produced by mixing materials with subtractive materials, additive materials, and other technologies.
(Editor in charge: admin)
0 Comments for “Analysis of the application of 3D printing at Oklahoma State University”