Siena Gardens launches 3D printing industry chain that can be used for maintenance of outdoor furniture and facilities

On October 21, 2021, SIENA Garden, a subsidiary of H. Gautzsch Firmengruppe, launched a new garden furniture repair service, providing customers with lasting spare parts support.By using Replique 3D printingTechnology, SIENA Garden can now replace worn parts, such as foot caps or knuckles, for customers’ outdoor facilities throughout their life cycle. This service is expected to not only allow SIENA Gardens to reduce its after-sales management expenses, but also to enable it to operate more sustainably while improving the collective experience of its customers.

Peter Benthues, CDO of H. Gautzsch Firmengruppe, said: “Today, customers are increasingly demanding sustainable and repairable products.policyIt can also be seen in, for example, the introduction of the right to maintenance regulations. Siena Garden wants to go a step further here. That’s what the brand stands for: more care, better prices. “

△ A sun lounger in the SIENA garden with ASA 3D printingarm handle. Photo via Replique.

A secure digital platform

In 2020, Replique was born as a chemical companyBASFThe business incubator Chemovator, their products revolve around their fully encrypted on-demand3D printingplatform.The company’s system is packaged as an “end-to-end” production solution that helps manufacturers turn to by supporting them through the product design, technology selection and digital warehousing stages3D printing.

Although the company does not actually directly serve its customers3D printingparts, but it has earned
FDM
, SLS, SLA and MJF suppliers to help fulfill their orders. To ensure this process is carried out in a secure manner, protecting clients’ intellectual property, Replique said any participating service agency will need to sign an NDA, while its platform fully encrypts any data sets that pass through it.
Sold together with their material qualification and part digitization services, their company’s production services have been
car
, transportation, industrial and consumer sectors. In one such use case, appliance maker Miele adopted Replique’s technology earlier this year to decentralize its supply chain.

Since integrating Replique’s platform with its online store, Miele has been able to produce faster and more cost-effectively than beforefoodAccess to safe accessories and spare parts, SIENA Gardens is now looking to achieve a similar goal, but in an aftermarket setting for gardens.

△ Two sizes3D printingCoffee clips, valuable separators, and hole cleaner material. Polyethylene terephthalate, ethylene glycol modified (PETG); Miele’s Replique-3D printingCoffee accessories can now be ordered through its online store. Photo via Replique.

Garden Furniture With Forever Warranty

To help users maintain their outdoor furniture, SIENA Garden currently operates an online spare parts store where it sells mobile and non-mobile repair parts. Many of these parts are made from specific polymers with the UV and moisture resistance required for long-term outdoor use, but producing such parts on demand for specific customers has previously proved difficult.

Max Siebert, CEO of Replique, said: “Due to high minimum order quantities, storage costs and one-sided purchasing strategies, it is currently almost impossible to supply spare parts for a long time. As a result, product life cycles are shorter than they may be. .”
Benthues added: “Not only did this lead to huge costs, but it also contradicted the ethical principles of sustainability set by Siena Gardens.”
To get around these sustainability roadblocks, SIENA Gardens has started digitally storing its spare parts through Replique’s “systematic inventory” process, where technical drawings can be converted into 3D models.Once ordered through SIENA Garden’s service, these parts are now available through Replique’s3D printingThe platform is automatically produced and shipped directly to the customer.

While Replique acknowledged that this repaired spare parts supply chain would increase production costs for customers, it also said the change would have long-term economic and ecological benefits by extending the lifespan of outdoor products, while SIENA Garden praised its The flexibility of the partner’s platform makes its “Eternal Spare Parts” service possible.Benthues concluded: “Replique is not only able to translate our3D printingrequirements can be implemented on the spot. Replique’s expertise combined with their secure and scalable platform is a game changer for us. “

△ 14 garden furniture components currently produced through Replique’s platform. Photo via Replique.

AM and Right to Repair

Earlier this summer, the European Union’s so-called right to repair legislation introduced a scheme whereby manufacturers of white electrical goods provide spare parts within ten years of their products leaving the factory.These changes may soon be adopted by the rest of the world, possibly for3D printing, inventory digitization and distributed manufacturing create a golden opportunity.March 2021,EOSNicolas Dill is accepting3D printingIndustry interviews predict that these changes will result in users being able to purchase the right to download and produce a certain spare part file. Likewise, Christian Darquier of Spare Parts 3D said at the time that the changes would mean that appliance companies would need to take a more systematic approach to truly harness the value of AM.

In light of EU reforms, Queensland University of Technology intellectual property professor Dr Matthew Rimmer has called for similar changes to Australians’ right to repair.In his research paper, the academic questions the country’s current product repair restrictions and suggests3D printingAdvances in technology can make it ideal for decentralizing spare parts production.

(responsible editor: admin)

Siena Gardens launches 3D printing industry chain that can be used for maintenance of outdoor furniture and facilities

0 Comments for “Siena Gardens launches 3D printing industry chain that can be used for maintenance of outdoor furniture and facilities”

Leave a Reply Cancel reply