China3D printingNet December 28th, in order to pay tribute to the classics, Toyota created a one-time copy of the Supra in the 1990s for the SEMA Show SEMA360. Toyota GR Supra Sport TopOn the basis of GR Supra Heritage Edition last yearby using3D printingTo create a movable roof.
Ed Laukes, vice president of Toyota Marketing, said: “Last year, we had such a great response to the traditional version. I asked our car garage people if they could take the traditional version to a new level. , And made Supra. Does everyone remember the movable roof of MKIV?
Many of Supra’s popularity comes from the “Fast and Furious” series, because the fourth-generation Supra has become a modified star of drag racing, and imported products are the most popular among racing fans. The 2019 model year vehicle adds some elements to the existing fifth-generation GR Supra, echoing the fourth-generation products, such as round tail lights and basket-style spoilers.
3D printing
Roof slab” alt=”Before painting and finishing, first
3D printing
The roof slab” width=”620″ height=”324″ />
Before painting and finishing, first3D printingRoof slabs. Image courtesy of Toyota.
This year’s version adds a new feature: a removable roof. When the roof is removed for various modification reasons, it is obvious that it cannot simply be re-added to the vehicle.In turn, the team turned3D printingTwo separate roof panels, which can be stored in the luggage compartment when not in use.
In order to create a completely open cabin, Toyota engineers had to consider the lack of structural integrity due to the removal of the roof. Therefore, the team must support most of the chassis from underneath the car (from the engine compartment to the bucket).The external structure of the roof has also been strengthened, so whether it is used or not3D printingPanel, they can all run.
The finished roof panel. Image courtesy of Toyota.
The roof pieces were carried out by Toyota Motor North America Research and Development Corporation of Ann Arbor, Michigan for the Toyota Motor Sports Technology Center in Plano, Texas3D printingof. The material used is 3D Systems’ Accura Xtreme plastic.
The roof panel has been removed from the vehicle. Image courtesy of Toyota.
China3D printingNet Comments: In this case, will3D printingIt was used at the critical juncture of concept cars at the upcoming trade show, but the technology has proven itself in the limited parts driving of many small-volume vehicles, regardless of whether they are concept cars, racers or luxury cars. As a technology,3D printingIt’s just that the throughput required for mass-produced vehicles cannot be fully achieved.However, it does feel as if it is coming soon, and in 2021, we are likely to hear of mass-produced economical cars for the first time.3D printingComponent news.
China3D printingnetOriginal article!
(Editor in charge: admin)
0 Comments for “Toyota 3D prints removable roof for GR Supra Sport”