Price: $189.00
(as of Oct 05,2024 15:25:54 UTC – Details)
Product Description
Upgrade Unique Official Tech Support Service. More Service Time
Enjoy Reliable and Professional Service
We are not only the seller but also a professional manufacturer with 5 years R&D and production experience of 3D printer.All our products were strictly check and test before sent out, 24 months service is our promise. With our 3D Printer, you can enjoy kinds of design, print and DIY fun.Any problem, we have more than 20 engineers provide professional support and Original accessories
Resume Print
When attempting some larger prints, even a 3-second power outage could spell disaster for a model already 10 hours or more into a longer print. The Ender 3 comes with a state of the art control board which, in the event of an unexpected power outage or surge, will remember the last recorded position of the extruder. Once power is restored, the control board will automatically restart where the print left off before the loss of power. You can sleep easy while your Ender 3 works hard.
POM Triangle-Slot Wheels
Creality changed the consumer-grade 3D printer market with the introduction of the much improved POM Triangle-Slot wheel design. Previously, printers used smooth metal rods and linear bearings which, during use, were much louder due to the metal on metal sliding. Our POM wheels are made of engineering thermoplastic which is rated as great for use in precision parts requiring high stiffness, low friction, and excellent dimensional stability. These wheels nearly silently guide the moving parts along the aluminum extrusion frame.
Safety Paired With Performance
The Ender 3’s power supply is a high quality and safety oriented component that was hand selected for its reliability. This power supply has two safety fuses built into the unit. These internal and external fuses serve to protect all of the valuable electronics and components from any potential catastrophic power surge or electrical discharge while the machine is plugged into the outlet. The Ender 3 power supply can heat the hotbed to over 90* C in just 5 minutes or less, with a full operating range of up to 115* C which opens the door to many types of experimental or exotic filaments that may require higher temperatures for printing.
What is Open Source?
The “Open Source” model is a decentralized software and hardware development model that encourages open collaboration. An open source project promotes universal access via an open-source or free license to a product’s design or blueprint, and universal redistribution of that design or blueprint. Open-source code is meant to be a collaborative effort where programmers and users improve upon the source code and share the changes within the community resulting in an improved experience for all.
Fully Open Source
For Everyone by Everyone
The Ender 3 is the first fully open source printer to come out of China. Creality 3D is working with its wonderful community of users and contributors to improve this open sourced Ender 3 every day. The result is a design culminating from some of the best and brightest minds in the 3D printing world. All files and relevant source code are available on our Creality 3D GitHub page. Some Benefits of Open Source Projects Include:
Security- Anyone can freely check source code to verify authenticity.
Quality- Anyone can enhance source code and reshare improvements for everyone to adopt.
Freedom, Flexibility, and Customizability- Once purchased, the source code is only the consumers. They control how, and where to use the product as they desire free of manufacturer control.
Interoperability- There is a large market of open sourced software and hardware in the 3D printing world that can all be used together with the Ender 3 like plug and play features.
Support- Thousands of other users and developers all share the same software, meaning resources such as tutorials, guides and DIY projects based on the Ender 3 can be shared with all users.
Printing Size
220x220x250mm
220x220x250mm
220x220x250mm
300x300x340mm
350x350x400mm
280x260x310mm
Weight
7kg
8.82kg
9.8kg
9.5kg
18.2KG
20.5KG
FDM/SLA
FDM
FDM
FDM
FDM
FDM
FDM
Resume Printing
✓
✓
✓
✓
✓
✓
Leveling
Manual
Manual
Manual
Manual
Auto BL Touch
Manual
Filament Sensor
✓
✓
✓
Pri
206
236
279
349
599
619
Customer show
Great printer, was easy to assemble and use
I bought the Ender 3 because I was unhappy with my previous printer which had severe adhesion problems even with careful leveling of the surface and surface preparation. Additionally I hated changing filament on the printer I had before this one because I would never be able to print after changing the filament without changing the print head. I did follow correct filament changing procedures but it never successfully went from one filament to another. So I feared this one might be the same but it was very reasonably priced and larger so I tried it.
THIS IS ONE AWESOME PRINTER
Unable to level bed due to slight warp;however, can be fix with glass. Other than that it works. Be sure to check fasteners a couple were lose. Easy instructions but it does help to watch a few videos on YouTube for more assistance. They helped me. UPDATE: GLASS PLATE WORKS. PRINTS ARE AWESOME Sept. 2018 UPDATE: modded this to be perfect.
It was in my budget and the build size was great for starting out in this new hobby
WOW!!!! This is my first 3D printer! After hours of internet searching I bought this unit. It was in my budget and the build size was great for starting out in this new hobby. Build time was about 1 hour and everything you need to asemble the unit is included. I was worried about build plate adhesion as that seems to be a comon issue in 3D printing “NOT” with this unit followed the Tempeture guide line on the filament and all three models have had great adhesion. The negatives of this printer are minor, poor placement of SD card slot, inlet to extruder is almost inline with the Z Lead Screw. These minor isues should not keep you from purchasing this printer! [[ASIN:B07BR3F9N6 Comgrow Creality Ender 3 3D Printer Aluminum DIY with Resume Print 220x220x250mm]] I would recomend this printer to anyone who wants to get started in 3D printing.
Customer show
Is Discontinued By Manufacturer:No
Product Dimensions:8.66 x 8.66 x 9.84 inches; 17.64 Pounds
Item model number:B07D218NX3
Date First Available:May 13, 2018
Manufacturer:Creality 3D
ASIN:B07D218NX3
Country of Origin:China
Fully open source: Creality 3D printers is working with its wonderful community of users and contributors to improve this open sourced product every day. A design culminating from some of the best and brightest minds in the 3D printing world.
NEXT GENERATION TECHNOLOGY: Our upgraded control board offers state of the art, “Resume Print” technology. Should your printer suffer unexpected power outages, it will resume from the last recorded extruder position. Goodbye failed prints! The advanced MK-8 extruder’s genius design greatly reduces the risk of clogging and uneven extrusion. High precision ball bearing wheels made from Delrin/POM engineering thermoplastic deliver high stiffness, low friction, and excellent dimensional stability.
PARTIALLY-ASSEMBLED KIT: The lower base and all wiring completed in our factory. This kit style 3D printer comes with all tools included and is an excellent project for middle school and high school-aged students. The perfect gift to spark a lifelong love for science and engineering, and provide a deeper understanding of machinery and robotics!updated USB Port makes it more convenient
CREALITY Official Store We are the ONLY official Creality 3D store! Because all of our products are shipped to the consumer directly from the manufacturer, we provide a 1-year limited and lifetime technical assistance. Professional customer service has always been a cornerstone of our company philosophy.
Resume Printing: Creality 3D printer equipped with super quiet printing designing, with smooth adjustable pulley, and if power is accidentally cut off during printing, accurate printing can be continued after power is switched on.
Reviews
There are no reviews yet.