SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

Price: $37.99
(as of Oct 05,2024 15:38:17 UTC – Details)

Product Description

Router Bit Set

Suitable for detail profile woodwork

with 1/4″ shank which suit for CNC router with 1/4” collet

Compare the UP cut with the DOWN cut

The down cut bit (left) leaves very clean edges while the up cut version (right) is far better at evacuating chips but that action can fray the edges of the cut to some degree.

Up cut bits are very efficient at evacuating chips from the hole or slot it is cutting. This is especially important when the hole is ¼”-deep or more. Deep holes or grooves still have to be cut using multiple light cuts, but the upward direction of the flutes while rotating prevent the debris from building up in the hole and binding or even breaking the bit.

Down cut bits require a slightly slower feed rate. This reduced pace allows the bit a little more time to throw chips out and for them to be re cut into smaller pieces that eventually are thrown from the hole or slot

4 different router bit in this pack

Ball Nose Router Bit

Usef for 3D woodwork, detail profile carving and engrave;

Tip diameter 0.5mm, 4.82 degree single side angle, 1/4″ shank

Down Cut Router BIt

Used for clear chips down, good edge quality on top face;

1/4″ cutting diameter, 1″ cutting length, down cut, 1/4″ shank

Up Cut Router Bit

Used for clear chips from the kerf left good quality on bottom face when through cutting;

1/4″ cutting diameter, 1″ cutting length, up cut, 1/4″ shank

90 Degree Chamfer Router Bit

Used for chamfering or beveling any part in a wide variety of materials. impove fluid flow and safety, to part aesthetics;

90 degree, 1/4″ shank

Is Discontinued By Manufacturer‏:‎No
Package Dimensions‏:‎4.3 x 3 x 0.6 inches; 3.99 Ounces
Item model number‏:‎WD-1
Date First Available‏:‎March 7, 2018
Manufacturer‏:‎SpeTool
ASIN‏:‎B07VR9TYRY

The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter
For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc
Long service life, Decreasing the times of changing cutters,Saving production time
Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut)
The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4″ Collet