China3D printingNet July 17 news, since last year, Kamp C has been3D printingWork and delivered COBOD BOD2 with dimensions of 10 x 10 m (32 x 32 ft) 3D printingmachine.The Center for Sustainable Development and Construction continues to monitor the world3D printingThe development of the building and carry out their own pioneering work, and now they announce the3D printing.
Although in some cases, the3D printingStill suspicious-especially when the promise may not be completely correct-the Kamp C team is very aware of this false advertisement and clearly stated that it did print the entire two-story house as one piece. The house is 26 feet tall, which is comparable to a typical row house in Belgium.
Picture: Kamp C and Jasmien Smets)
“The reason why this house is so unique is that we use a fixed 3D concrete printer to print it.” Kamp C project manager Emiel Ascione said.
Combine their success with others that consist of only one floor and are manufactured in a factory and then assembled to other places.3D printingComparison of construction projects,Kamp House C was manufactured on site in Westerlo. Thanks to funding from the European Regional Development Fund, the projectpossibleWill cooperate with European C3PO. The Kamp C team and its project partners continue to improve the construction industry’s3D printinginterest of.
Kamp C, based in Belgium, printed one of the first 3D houses in the world. Picture: ©Kamp C / Jasmien Smets)
Formwork is unnecessary, saving a total of 60% in terms of concrete, time and budget. Except for fibers mixed into concrete materials, there is almost no need for wire mesh reinforcement.
The researchers claim3D printingThe house is three times “sturdy” than a traditional brick house, and the researchers believe this structure is a test model. They will continue to study the integrity of the building to analyze its true potential for longevity.
Ascione says“We printed a cantilever, its walls are very curved, and the types of walls are different… We also introduced a solution for the traditional thermal bridge, which completely eliminated the cold bridge, and we developed a low-energy house , With all the shortcomings, including floor and ceiling heating, special facade solar panels and heat pumps, we will also add a green roof.”
The team has a very flexible plan when starting the project. In fact, the architects were not sure about the purpose of the building when they started printing “the shape of an ordinary modern house.” As a round house, the building can be used for residences, offices or open exhibition spaces.
3D printing
The house includes a simple kitchenette” alt=”
3D printing
The house includes a simple kitchenette” width=”620″ height=”411″ />
3D printingThe house includes a simple kitchenette (Image © Kamp C / Jasmien Smets)
The global construction industry has completed many3D printingproject.Dubai has always been the largest in the world3D printingHot spots of buildings such as buildings. Many different research projects on construction continue, including the continuous construction of habitats on other planets such as Mars.Although this latest model in Belgium is strategically designed to show3D printingPotential, but the Kamp C team hopes to print out similar houses in the next two days.
China3D printingNet compile article!
(Editor in charge: admin)
0 Comments for “Kamp C completes a two-story 3D printed house in Belgium”