Price: $46.99
(as of Oct 05,2024 15:36:08 UTC – Details)
Product Description
Direct Extruder Kit
About Us
Dawnblade is committed to providing novel, practical and high-quality products for every customer.
Currently Main products is 3D printer accessories, most of which are matched with Creality printer.
In the future, we will continue providing more 3D printer accessories for every customer, so stay tuned.
3D Printer Direct Extruder Upgrade Kit
Genuine direct extruder kit provided by Creality, which fits for Ender 3, Ender 3S, Ender 3 Pro.
Compared to remote bowden extrusion, this direct extrusion allows your 3D printer to print flexible filaments, especially TPU.
The kit has been basically assembled before leaving the factory and can be directly installed on the printer, making it convenient and quick to use.
Lower torque requirements on stepper motor
Smaller filament retraction than remote bowden extruder
Feed-in more evenly and lower probability of cloge
All metal structure, durable and wear resistant
Full-assembled products, can be installed directly on printer
Advanced Hotend Kit
Integrated Structure
Full assembled MK8 hotend set, all parts are already assembled, no worry of wasting time.
All-metal Shell
The anodized metal shell, hard, wear-resistant and anti-rust.
The wiring layout is simple, easy to disassemble and repair.
Powerful Cooling System
Modular heat dissipation system, uniform heat dissipation, stable temperature of the heating block.
Original Parts
Creality original parts, compatible with hotend of Ender-3, Ender-3S, Ender-3 Pro, CR-10, CR-10S.
Extrusion System
V-Slot Aluminum Backplate
The assembled back plate with pulleys has a simple structure and is easy to install and disassemble.
The backplate is compatible with Creality Ender-3, Ender-3 Pro, CR-10, CR-10S, CR-10 S4, CR-10 S5.
Stable Performance
Creality Original 42-40 Stepper Motor, lower noise, strong torque.
No step lost during operation, which ensures stable extrusion.
The motor is compatible with Ender-3, Ender-3 Pro, CR-10, CR-10S, CR-10 S4, CR-10 S5.
Smooth Operation
Creality Original MK8 extruder, providing smoother filament feeding in.
Extrusion gear with high density and U-bearing fit closely, avoiding sliding and grinding.
The extruder is compatible with CR-10 series, Ender-3 series,Ender-5 series.
About Direct Extrusion
Advantage
More accurate feeding and filament retraction.
Lower torque requirements on stepper motor.
Easy to change filament.
Target
Print flexible filaments such as TPU, or need higher printing accuracy.
Disadvantage
Integrated structure, inconvenient to disassemble.
Print head system is heavier, should lower printing speed to ensure accuracy.
Tips
All parts have been assembled, ready to use after unboxing.
If use on CR-10/ CR-10S, you need to change the voltage.
If use on Ender-3 V2, replace original Thermistor to Ender-3 V2 heat Thermistor.
But most single parts are compatible with Ender-3, CR-10 series, you can DIY on your need.
Don’t use it for too long at a time, otherwise the guide rail may be bent by its weight.
Heavier, so it’s better to company with dual-z axis kit for use to get better printing accuracy.
Package List
1 * Extruder drive feed kit
1 * Connecting cable
1 * Wiring diagram instruction
1 * Installation tools and accessories
Extrusion Type
Direct extrusion
Compatible
Ender-3, Ender-3S, Ender-3 Pro
Operating Voltage
24V
Hotend Type
MK8
Hotend Compatible
Ender-3, Ender-3S, Ender-3 Pro(If used in CR-10, please replace heater)
Motor Type
42-40
Motor Compatible
Creality Ender and CR-10 series
Extruder Type
MK8
Extruder Compatible
CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, Ender-3, Ender-3 Pro, Ender 3 V2, Ender-5, Ender-5 Pro, Ender-5 Plus
Category
3D printer accessories
Applicable
Ender-3 / Pro / V2
Ender-3 / Pro / V2
Ender-3 / Pro / V2
Most of 3D printers
Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 Max, Ender-5, Ender-5 Pro, CR-10
Type
Print bed
Print bed
Z-axis rod
Feed pipe
Bed leveling
Main materials
Borosilicate glass
Borosilicate glass
Steel
PTFE
Purpose
Platform replacement
Platform replacement
Z-axis upgrade
Bowden tube upgrade
Leveling upgrade
Package Dimensions:6.54 x 6.18 x 3.43 inches; 1.68 Pounds
Date First Available:November 22, 2020
Manufacturer:Dawnblade
ASIN:B08NZQJD4V
Upgraded Kit – Direct extruder kit for Ender 3, Ender 3S, Ender 3 Pro. Support all 1.75mm diameter filament in the market, especially for flexible filament.
Smooth Feed-in – The direct extrusion structure lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament.
Greater Compatibility – Compared with bowden extruder system, more fit for printing with PLA, TPU and other flexible filaments.
Strong & Sturdy – This direct extruder kit is all metal structure, durable and wear resistant.
Easy Assemble – Longer connecting cable, tools, accessories and diagram instruction, easy to assemble.
Reviews
There are no reviews yet.