Newest BLTouch V3.1 Auto Bed Leveling Sensor Kit – 4.2.2 / 4.2.7 Mainboard compatibility ONLY for Creality Ender 3 / Pro / V2 / 5 / Pro / CR-10 – 1M Capricorn PTFE Tubing + Other Accessories Upgrades

Price: $54.99 - $49.99
(as of Oct 05,2024 15:30:33 UTC – Details)

NOTICE: This product is only compatible with 4.2.7 and 4.2.2 motherboards and the correct firmware for the Ender 3/ Pro/ V2/ 5/ 5 Pro/ CR-10 can be found at Creality’s website under the downloads section. Flashing the board with the relevant firmware takes all of 3 minutes. This BL Touch kit is only guaranteed during use with STOCK Creality Parts. BigTreeTech SKR Boards are NOT supported by the firmware installed on this product. This is the original BL Touch mechanical bed level sensor designed to work with only Ender 3 and Ender 3 Pro printers. There are many versions of the CR-10 that are NOT compatible with this product. All required hardware to install the BL Touch are included in this bundle as well as some of the most common upgrades available to help improve print quality and consistency. Installation of this product does require a flashing of a new firmware to the Control board which can be found at the Creality website under downloads. Once the product is installed, your printer will be able to automatically determine the distance from the printing surface to the nozzle and this mechanical sensor will work on every type of printing surface. The included springs and Capricorn PTFE tubing will also greatly help to improve print quality over stock options on most Creality printers. It is recommended that anyone who purchases this product be at least moderately familiar with flashing firmware. All instructions are included in the bundle as well as many helpful videos on YouTube that go into deeper detail on the matter. F1rst Layer will also be happy to help with any questions or concerns that you may have so please do not hesitate to contact us for further information. You will need to calibrate your Z-offset when installing the BL Touch. Please YouTube z-offset calibration to find tutorials on how to do this correctly.

Package Dimensions‏:‎7.8 x 5.5 x 1.97 inches; 5.61 Ounces
Date First Available‏:‎July 11, 2020
Manufacturer‏:‎Creality Antclabs F1rst Layer
ASIN‏:‎B082DCXP96

This product is only compatible with 4.2.7/4.2.2 motherboards. Firmware link in product description.
The BL Touch automatically detects the beds height at multiple locations around the beds surface.
Capricorn XS Series PTFE Bowden tubing is included to help improve the accuracy of the printers.
The 6 upgraded bed springs included are much stronger and stiffer than stock Ender series springs.
The PC4-M6 + PC4-M10 provided are some of the best available and 2 of each are included in this kit.