Price: [price_with_discount]
(as of [price_update_date] – Details)


Product Description





[Multi-purpose] OVERTURE’s filament is supposed to apply to daily life, example vase, prototype, pen holder and so on.

[Easy to print] it applies to most 3d printing machines, which could make sure our filament squeezed out evenly, and adhere to the bottom plate easily with perfect layer adhesion.

[High precision] Use advanced equipment to make sure that diameter of 95% of our filament is at 1.75 mm, dimensional accuracy + / – .03 mm.

Good toughness

Extrude smooth lines


Our brand was founded in 2019. The founder of the brand is a scholar who loves 3D printing. In order to be able to print better models, with over 8 years’ 3D filaments R & D experience, we decide to turn our professional experience and large-scale production capacity into quality and economical products and let all people enjoy printing together.

Shakespeare once said: What’s past is prologue, thus OVERTURE was established.

Density : 1.16 – 1.25 (g/cm3 at 21.5˚C)

Tensile strength (X-Y) : 46.6 ± 0.9 (MPa)

Tensile strength (Z) : 43.5 ± 3.1 (MPa)

Elongation at break (X-Y) : 1.9 ± 0.2 (%)

Bending modulus : 3283 ± 132 (MPa)

Bending strength : 85.1 ± 2.9 (MPa)

Charpy impact strength : 2.7 ± 0.2 (kJ/m2)

Young’s modulus (X-Y):2636 ± 330 (MPa)


Here is a introduction of printing project from our customer

[intense_row] [intense_column size=”4″ medium_size=”4″ small_size=”12″ extra_small_size=”12″]1[/intense_column] [intense_column size=”4″ medium_size=”4″ small_size=”12″ extra_small_size=”12″]2[/intense_column] [intense_column size=”4″ medium_size=”4″ small_size=”12″ extra_small_size=”12″]3[/intense_column] [/intense_row]

1[intense_row] [intense_column size=”4″ medium_size=”4″ small_size=”12″ extra_small_size=”12″]They designed a pavilion using Digital fabrication methods. The method they chose was 3d printing with thermoplastics (for example: OVERTURE White PLA Filament).[/intense_column] [intense_column size=”4″ medium_size=”4″ small_size=”12″ extra_small_size=”12″]The entire structure was put together with 50 3d printed connections (nodes) with 254 plywood members that spanned between each node. In total they used about 6 different printers, 13,354 grams of filament were used and there was a total of 1,501 hours of printing. The entire pavilion gets bolted together in about 2 days and then a string element gets woven through the pavilion.[/intense_column] [intense_column size=”4″ medium_size=”4″ small_size=”12″ extra_small_size=”12″]The pavilion was designed to be walked through, drawing you in through expansion and contraction. As you enter you are greeted by this big vast opening which then shrinks around you when walking to the center, then when exiting you are drawn out again through the end opening up again. Another element that played a key part was the string. When standing in the center of the pavilion you are not only at the smallest part of the pavilion but the string element is woven in such a way that its almost like its spinning around you.[/intense_column] [/intense_row]


Yoni Comhaire, Gabriela Boroweic are seperately the fifth year architecture student at Virginia Tech and graduate architecture student at Virginia Tech.

They designed a pavilion using Digital fabrication methods. The method they chose was 3d printing with thermoplastics (example: White PLA Filament)

Suggested Printing Temp

230 – 250 C

190 – 220C

190 – 200 C

190 – 220C

190 – 220C

210 – 230 C


1.24 (g/cm3 at 21.5˚C)

1.32 ±0.1 (g/cm3 at 21.5˚C)

1.2 (g/cm3 at 21.5˚C)

1.32 ±0.1 (g/cm3 at 21.5˚C)

1.29 ± 0.01 (g/cm3 at 21.5˚C)

1.19 – 1.24 (g/cm3 at 21.5˚C)

Charpy impact strength

5.1 ± 0.3 (kJ/m2)

5.66 ±0.44 (kJ/m2)

13.4 ± 1.2 (kJ/m2)

5.66 ±0.44 (kJ/m2)

5.15 ± 0.19 (kJ/m2)

Moisture Sensibility






Very Likely

Package Dimensions‏:‎9.41 x 8.43 x 3.11 inches; 2.2 Pounds
Date First Available‏:‎February 17, 2019

【1 kg PLA Spool x 1 & Build Surface x 1】– Each PLA spool comes with 1 piece of quality 200 × 200 mm / 7.88’’ × 7.88’’ build surface to support Overture filaments. Grid layout on the surface for easy resizing
【Clog-Free & Bubble-Free】– Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re-sealable bag
【Less -tangle and Easy to Use】– Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother
【Dimensional Accuracy & Consistency】– advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy + / – .05 mm; 1 kg spool (2.2lbs)
【Cost-effective and Wide Compatibility】– With over 8 years’ 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more



There are no reviews yet.

Be the first to review “OVERTURE PLA Filament 1.75mm with 3D Build Surface 200mm x 200mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer (Black 1-Pack)”
Review our product to get a chance to receive coupon!

Your email address will not be published. Required fields are marked *